Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket CAN bus immobiliser. It's discrete, doesn't employ LED indications or key fobs and is hidden within the wiring of the vehicle.
It also permits the user to turn off the system temporarily by using Transport Mode to use it when they are renting their vehicle. This guide will take you through the steps of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against key cloning, hacking and relay attacks. The system is linked directly to the ECU of your vehicle and secured by a PIN code you set. It's inaccessible to thieves using scanners for diagnostics or other modern methods, and is not able to be disabled by cutting circuits.
The system is simple to use, however it's important to have professional installation to ensure a smooth and secure connection with your vehicle's ECU. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm to complete the protection package for your vehicle.
The first step is to disconnect your battery in order to avoid accidental airbag deployment or short circuits. Once this is done, the installer can safely begin work. Basic hand tools are helpful to make precise connections and a multimeter can be used to check the electrical properties and safety. Cable ties and insulation tape are also necessary for securing connections and keeping wiring neat. The Ghost Immobiliser user's guide will provide specific guidelines tailored to your model.
It is crucial to select a grounding location that is free of any paint or debris during installation. The installer must be sure that the immobiliser's CAN H and CAN L wires are connected to the correct ports on the vehicle's ECU. These wires can be plugged into or soldered, depending on the model. To ensure a secure and long-lasting connection, it is recommended that you use a high-quality plug.
Once the installation is complete After the installation is complete, the customer can turn on Transport Mode. This allows valet parking or mechanics to use the vehicle without knowing the pin code. To do this, the user must hit the service button on the dashboard 5 times in a matter of 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. It's an excellent choice for those who rent out their vehicles frequently on platforms such as Turo. Immobilisers can also reduce insurance premiums, since it significantly decreases the risk of theft.
Getting Started
If you're seeking a solution to safeguard your vehicle from theft You can't go wrong with an autowatch ghost immobiliser. The device stops your car from starting the case that someone steals or copies your key. This is due to its advanced technology that is designed to prevent the engine from starting unless the correct PIN code is entered.
The device is connected to the vehicle's bus network, CAN, allowing direct communication with the ECU. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence that only you can understand. This makes it impossible for anyone else to start your vehicle. This is the most secure way to protect your pride and joy. It will not lose its value if you ever want to sell it.
Installing a Ghost immobiliser is easy however, you must follow the instructions to avoid electrical issues and malfunctions in the system. First, you have to locate and identify a constant 12V power source as well as an adequate grounding point on the chassis of your vehicle. After that, you are able to begin connecting the wires for the immobiliser. Use high-quality connectors, and soldering techniques to ensure a solid connection. Also, be sure to insulate the connections by using heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
Once the wires have been connected, you can connect the battery and start the engine to determine whether the immobiliser works. Once you have verified that everything is working properly, you can install the immobiliser in a secure location in the vehicle. Make sure to hide it properly to stop any thief from taking advantage of it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a high-quality deterrent to car burglars. It provides superior protection against key cloning, hacking and relay attacks, and it can't be disabled without knowing the code. The device is also easy to use and can be set into the service valet mode to ensure that your automobile will not be activated when you take it in for service or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to stop theft of vehicles. It communicates with your vehicle's ECU and directly connects to the CAN bus. Contrary to other aftermarket systems which require the removal of circuit components the Ghost Immobiliser won't interfere with any of the factory settings of your vehicle.
It's also totally undetectable by thieves using diagnostic scanners. The system doesn't send or receive radio frequency signals and instead uses CAN data to communication with your ECU. It doesn't even require any modifications to your current key fobs.
To utilize the Ghost Immobiliser, simply switch on the ignition in your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. Now you can start your vehicle and drive safely.
Once installed, the Ghost Immobiliser protects your car against hacking or key cloning, while preserving its value. In Transport Mode you can temporarily disable the Ghost Immobiliser when you have to hand your car to service or valet park.
You'll require a constant power source (12V) in addition to a grounding point to complete the installation of the Ghost immobiliser. Make sure that both are well-insulated and safe to touch. Cable ties are also suggested for bundling and securing the wires. This reduces the possibility of theft by thieves. To avoid making mistakes, double-check these points and mark them using a label or tape. It's recommended to examine all connections for signs of wear and tear. Loose connections can lead to problems with the system, so be certain that they are securely in place and properly insulated. Don't forget to test the Ghost Immobiliser after installation is completed. This will confirm that the unit functions properly and that all connections and insulation are secure. If you encounter any issues, you must be certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that is integrated into your car's ECU to prevent the engine from starting without authorization. Its innovative technology safeguards your vehicle against hacking and key cloning and other common methods used by thieves to steal vehicles. The Ghost also works in conjunction with existing alarm and tracking systems to offer the ultimate vehicle protection. ghost ii immobiliser and discreet design make it a preferred choice for car enthusiasts and security-conscious motorists alike.
It is important to follow the steps of installation to ensure the correct integration of the Ghost Immobiliser. Consult the wiring diagram of your vehicle as it will aid you in locating and connecting the wires. You'll need to determine the grounding and power sources. Once you've found them, you'll be required to mark them so that they are easy to locate during the installation process. It is essential to use top-quality materials and tools. Hand tools are essential to assist you in making precise connections. A multimeter will verify electrical values, and ensure security. Insulation tape and cable ties can help keep connections neat and tidy. A Ghost-specific user's manual is also available.
Before you begin installing it is essential to test the system by entering the PIN code and starting the vehicle. This test will verify that the immobiliser is working as it should and stop unauthorised vehicle starts. It is recommended that you perform this step regularly as part of your routine inspections of the vehicle to ensure the system is always functioning correctly.
After the installation is completed, you can drive your car with confidence. The Ghost will safeguard your pride and joy from would-be car thieves. It will ensure that no one can escape with your car if they do not have the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts at theft or tampering. This will allow you to track your vehicle if it is stolen.
The Ghost is compatible with a wide variety of vehicles, including those made by all major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to find out more about our service and installation options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards in the installation of our products. This reassures customers, insurers and law enforcement agencies that all installations are performed safely and correctly.