Ghost Immobiliser Fitting
Secure your vehicle from key theft, cloning and hacking with the first aftermarket immobiliser for CAN. The Ghost app and GPS tracking can be linked to the immobiliser to send you alerts when your vehicle is stolen or tampered with.
Installing a Ghost immobiliser is a breeze for a skilled technician. It is essential to have the proper equipment and heat shrink tubing.
Getting Started
Contrary to physical theft protection devices like wheel locks and car alarms, ghost immobilisers safeguard your vehicle without the use of key fobs or LED indicators. Instead, they connect directly to the ECU's CAN network and can only be started after entering a PIN code sequence. This offers a higher level of security against key hacking, ECU swapping and cloning.
Therefore, the installation of a ghost immobiliser Birmingham has to be done with extreme agility and precision. It can be a bit like navigating an icy minefield. One mistake can cause serious damage to the circuits of your vehicle's electrical system. To avoid this, it's crucial to be aware of the installation process and prepare your vehicle accordingly.
You will need to remove interior panels from the vehicle to make space for your immobiliser. Once you've found the ideal place to conceal it and secure it using cable ties to prevent it from being removed or tampered with. Clean up your wiring by connecting loose wires and using insulation tape to cover exposed connections. This will reduce the risk of a short circuit that is not intended to happen and improve the appearance and reducing the chance of theft.
Identify a constant source of 12V power, as well as a grounding for the ghost immobiliser. Once you've located them test the power cables using a multimeter. Connect the CAN H and CAN L wires from the immobiliser to the designated power source and the grounding point.
Once you've made all of the necessary connections It is important to check the connections and examine the immobiliser for indications of corrosion or damage. By entering a PIN and then starting the car is a great method to test the system. This should be an integral part of your routine, since it can help you detect any issues that might be intermittent early on. Regular testing also helps to extend the life of the device and ensure it's operating at peak performance.
Preparing the Vehicle
The installation of an Ghost immobiliser is a complex task that requires tools and knowledge. A wiring diagram of the vehicle is essential to identify the proper wires and establishing precise connections. A multimeter can be used to verify the electrical value and ensure safety. Cable ties and insulation tape can be used to protect connections from being tampered with and to keep them neatly secured. A user manual is available for the Ghost Immobiliser. It will give you specific instructions specifically tailored to the model.
Once installed, a ghost immobiliser can prevent unauthorised engine start by requiring that the owner input a unique PIN code sequence through existing buttons in the steering wheel or on the centre console. The code can be altered at any time by the owner, either manually or remotely through an app for mobile devices. The device is silent and undetectable by thieves, as it does not emit any radio frequencies.
Ghost 2 immobiliser are directly connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by ECUs and then blocks the engine if a false signal is detected. The system is weatherproof and tamper proof. It doesn't have any LED indicators or keys to attract thieves' attention.
It can be positioned behind the dashboard or in a discreet area, so it isn't seen by thieves and does not hinder the vehicle's performance. It is also possible to put it inside a small, compact box and makes it less likely to be discovered during the test drive by unscrupulous salespeople for cars.
Its stealthy operation, combined with its integration into the vehicle's CAN-bus system, is an effective deterrent to modern car theft methods like signal relay attacks and key cloning. The system can be combined with other security measures to create a formidable barrier that can thwart even the most obstinate thieves. This is why more insurance companies are now suggesting or even requiring ghost immobilisers to be fitted, as it will significantly lower the cost of insurance.
Making the Connections
Ghost immobilisers are completely silent, unlike traditional security systems that can be heard by thieves. They stop thieves from knowing that your vehicle is in operation. They also stop high-tech methods used to steal vehicles for instance, OBD port hacking. Installing them without leaving permanent marks on your car is an excellent option for those who intend to sell the car in the near-future.
The Autowatch Ghost 2 is a immobiliser CANbus that is among the most reliable and modern solutions to stop car theft. It uses the CAN data network to shut down your engine and generates a PIN code that only you know, meaning it's difficult for criminals to detect. It is compatible with a wide range of vehicles, and works with many features already installed, such as car alarms and steering wheel locks. GPS trackers, and door lock bypass.
If you opt to use a Ghost immobiliser for your vehicle, make sure to consult the wiring schematic to identify the wires that connect. Verify their positions to ensure they are exact, and label them or tape them to help you keep track of them. You'll also need to locate a consistent power source (12V) for the system as well as an earthing. Once you have these in place, you can start to make the connections needed to complete the installation.
The ghost immobiliser won't allow your vehicle to start unless the pin code is entered via the buttons on the dashboard or steering wheel. This will stop ECU cloning as well as other methods of theft of vehicles. It can also be paired with other Thatcham approved security accessories such as alarms and tyre clips to give your car an even higher security level.
As the UK automotive aftermarket industry expands and expand, so do the options to secure your vehicle. There are many ways for thieves to gain access into your vehicle and steal it, which is why it's crucial to take every precaution to stop it from being taken. Ghost immobilisers are an increasingly popular option for car owners who are accountable.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU using the CAN network. This stops the engine from being started until the PIN code is entered. This makes it very difficult for thieves to copy your key fob and start your vehicle, and more difficult to disable the system through hacking into its electronics.
Ghost Immobilisers are also able to be used in conjunction with GPS tracking devices that will aid in tracking your vehicle and track it in the event of theft. This is a feature that isn't often found in security products that are sold aftermarket however it's a great option to increase the security of your vehicle and provide you with peace of mind.
The Ghost-II immobiliser offers not only greater security, but also a pleasant experience for the user by getting rid of the need for additional key fobs or devices. It features a simple, intuitive PIN code entry that can be integrated seamlessly with your daily routine. It also has convenience features and deactivation options that allow you to temporarily disable the immobiliser to valet park or service your vehicle.
Before you begin the installation process, familiarize yourself with the vehicle's wiring and prepare the necessary tools. A basic set will allow you to create precise connections. A multimeter is a tool to test electrical values. Insulation tape and heat-shrink tubing is essential to protect connections from short circuits. Cable ties can also be used to secure wiring. It is also essential to work in a well-lit location and wear the appropriate safety equipment when working with electrical tools and components.
After you've completed the installation, you should test the Ghost immobiliser to make sure that it's working properly. It is recommended to first start the car without entering the PIN. If this doesn't work then you'll need to test again and examine the connections more carefully.
The Ghost Immobiliser, unlike other security systems, is a hidden device that cannot be recognized by thieves. It is also more effective than physical deterrents such as wheel clamps and steering locks. It is TASSA approved and recognised by a few insurance companies, making it a cost-effective investment that will give you peace of mind you want.